Use it to stain any type of wood for indoor or outdoor use.
A highly concentrated wood stain that stains wood in one simple application. The formulation is water-based and so is safe to use in all environments, has a very low odour and is non-toxic.
Our Wood Stain is specially formulated to evenly dye wood, ensuring equal and even colour penetration throughout. The stain dries to a natural matt finish in only 10 minutes and has excellent coverage.
Finishing Wood After Staining
After staining wood, you should finish the job by sealing the stain in with one of our Wood Waxes, Wood Varnishes or Wood Oils. These will enhance the colour of the stain further, provide additional protection and can be used to alter the finish to either satin or gloss.
Our Wood Stain is available in nine popular wood stain colours. If you don't see the colour you want listed below, you can also mix the different colours of stain together to achieve any colour of Wood Stain you need.
You can use Wood Stain on any wood, just make sure it has been thoroughly cleaned and any old finishes removed.
Preparing Wood for Staining
New Wood - Needs to be sanded first to create a lovely smooth finish. Sand first with 120g sandpaper, then with 240g and again with 320g. This process will help even out the surface creating a lovely smooth finish for the stain to absorb into.
Used Wood - If the wood is old it may be painted or varnished. If so, remove any old coatingsusing our Paint & Varnish Remover. Or, if the wood has been treated with an oil or wax, wipe the surface down with Thinners or Mineral Spirit to remove this. After removing the old finish, sand smooth with 320g sandpaper.
Pine & Softwoods - Once you have prepared the surface as above you should apply a Pre-Stain Conditioner. This is because softwoods absorb wood stains in an uneven fashion and could come out blotchy once stained.
In all instances, ensure the surface is clean and any saw dust & dirt has been removed.
Applying Wood Stain
If you are unsure of the colour, test it on an unseen area first. The stain can be applied with either a cloth, bristle brush, or for best results a Foam Brush. Apply the stain liberally going in the direction of the grain, leave it to soak in for a minute or two and then wipe any excess of using a Lint Free Cloth.
The longer you leave the excess on the surface to soak in the deeper/richer the colour will appear. We therefore recommend to remove it after only a minute or two and if it dries too light, you can apply another coat. However, if you apply too much and it dries too dark, it is much harder to sand, strip and then re-stain the wood!
After wiping off the excess you’ll need to wait for about 10 minutes for the stain to thoroughly dry. Once it’s a dry a second coat can be applied if desired; applied in the same way as the first.
Finishing Wood After Staining
After staining the wood it should be finished with a varnish, oil or wax. The Wood Stain is colourfast once dry but by applying a finish you can;
Increase protection against water and staining
Enhance the colour of the stain; an oil or wax will really bring out the colour
Increase the shine of the wood
Seal in the stain to help it age better
The wood should then be maintained as per the instructions for your chosen finish.
Video - How to Apply Wood Stain
Coverage & Shelf Life
1 Litre of Wood Stain will cover approximately 12m2.
Once open, use within three years.
1. What is the best way to apply Wood Stain?
When staining wood you can use a bristle brush, cloth or for best results use a Foam Brush. Application is simple, just wipe it over the surface and the stain will be absorbed by the wood. If you want to know how to stain wood, then watch one of our videos on this page.
2. How do you prepare wood for staining?
If the surface is dirty clean it first with a suitable Wood Cleaner. Otherwise, sand it with 320g sandpaper in the direction of the grain. If the wood is freshly sawn, you may need to start with a more coarse sandpaper such as 120g and work your way up to 320g.
3. Can you stain wood without sanding?
Yes you can. Our Wood Stain has been designed to deeply penetrate all wooden surfaces. However, you’ll always get best results by giving the wood a light sand first with 320g.
4. How long does it take Wood Stain to dry?
Our Wood Stain is a quick drying stain, taking only 10 minutes to thoroughly dry. Once dry, the wood can be stained with a second application if desired.
5. How long should stain sit before wiping?
We recommend leaving the stain to soak into the wood for one or two minutes before wiping the excess off. This will prevent the stain from staining the wood to dark; you can then apply a second application of Wood Stain if you want to darken the wood further.
6. What happens if you don’t wipe the stain off?
Wood Stain is designed to penetrate into the wood and so the longer you leave it on the more it will soak in and the darker the wood will become. Wood can also only absorb so much stain before it becomes saturated and so any excess would then dry on the surface. This is why we recommend to wipe the stain off after one or two minutes.
7. Does wood need to be sealed after staining?
Sealing wood after staining isn’t required, but it is recommended. Not only do wood finishes enhance the colour but they’ll also protect the wood from scratches and help stop it from fading. We recommend using a Wood Varnish.
8. Do you sand after staining wood?
You shouldn’t sand wood after you’ve applied a Wood Stain. The wood should be sanded prior to staining. If the wood stain raises the grain of the wood, you can sand the wood and then re-stain.
9. How many wood stain colours do you have?
We have a selection of nine different wood stain colours. From popular dark wood colours like dark oak and black wood stain, to lighter colours such as teak, natural oak and white ash.
10. Is it an interior wood stain?
Yes, our wood stain can be used on all interior wood. It can also be used on exterior wood too.
We Ship World Wide - Postage Calculated on Checkout